CAMAR 801 / 807 Cabinet Hanger Drilling Template
Print Profile(2)
Bill of Materials
Description
DESCRIPTION — English
Precision drilling templates for CAMAR 801 (wall cabinets) and CAMAR 807 (base cabinets) hangers. Press-fit standard ball bearings into the pockets and use them as drill bushings for a 10 mm bit — no measuring, no marking out, just drill.
Two print profiles included:
- CAMAR 801 — wall cabinets, 2 holes
- CAMAR 807 — base cabinets, 4 holes in a 2×2 layout
| CAMAR 801 | CAMAR 807 | |
|---|---|---|
| Holes | 2 | 4 (2×2) |
| Row 1 from top | 42 mm | 20 mm |
| Row 2 from top | — | 84 mm |
| Back / front hole | 20 / 52 mm | 20 / 52 mm |
| Bearings needed | 2× | 4× |
Both templates are left-right symmetric — the two sharp top corners are the reference edge, so the same print works on both the left and right cabinet side without flipping.
You will need:
- 2× or 4× ball bearing 6800ZZ (10 × 19 × 5 mm) — press-fit into the pockets
- 10 mm drill bit
- Recommended drill depth: ~10.5 mm
Print flat, bearing pockets facing up. Press bearings in from the top after printing. Place the template against the inner face of the cabinet side panel, sharp corners flush with the top and back edges, and drill through the bearings.
Boost Me (for free)
If this saved you time (or a misdrilled hole 😄), a Boost would mean a lot - it helps the model reach more people and keeps me motivated to share more workshop tools like this one. Thanks!
DESCRIPTION — Polish
Precision drilling templates for CAMAR 801 (wall cabinets) and CAMAR 807 (base cabinets) hangers. Press-fit standard ball bearings into the pockets and use them as drill bushings for a 10 mm bit — no measuring, no marking out, just drill.
Two print profiles included:
- CAMAR 801 — wall cabinets, 2 holes
- CAMAR 807 — base cabinets, 4 holes in a 2×2 layout
| CAMAR 801 | CAMAR 807 | |
|---|---|---|
| Holes | 2 | 4 (2×2) |
| Row 1 from top | 42 mm | 20 mm |
| Row 2 from top | — | 84 mm |
| Back / front hole | 20 / 52 mm | 20 / 52 mm |
| Bearings needed | 2× | 4× |
Both templates are left-right symmetric — the two sharp top corners are the reference edge, so the same print works on both the left and right cabinet side without flipping.
You will need:
- 2× or 4× ball bearing 6800ZZ (10 × 19 × 5 mm) — press-fit into the pockets
- 10 mm drill bit
- Recommended drill depth: ~10.5 mm
Print flat, bearing pockets facing up. Press bearings in from the top after printing. Place the template against the inner face of the cabinet side panel, sharp corners flush with the top and back edges, and drill through the bearings.
Boost Me (for free)
If this saved you time (or a misdrilled hole 😄), a Boost would mean a lot - it helps the model reach more people and keeps me motivated to share more workshop tools like this one. Thanks!
License
Comment & Rating (0)