Search models, users, collections, and posts
X2D Print Head PTFE Cable Guide
IP Report
Print Profile(3)
0.12mm layer, 5 walls, 15% infill
Designer
22 min
1 plate
0.08mm layer, 2 walls, 15% infill
Designer
37 min
1 plate
0.08mm layer, 2 walls, 15% infill closed pipe
Designer
47 min
1 plate
Open in Bambu Studio
Boost
110
429
42
7
331
300
Released
Description
Content has been automatically translated.
A simple model to guide the 2 PTFE tubes on the X2D so they do not rub against the glass pane.
Update 1:
Added a second print profile with closed tubes. The inner diameter is slightly larger so the PTFE tube is not pinched.
Update 2:
Added a third print profile with an open design and closed tube ends. The guidance is only provided at the ends so the resistance when pushing filament through is slightly lower than with the other models. The print profile is in PETG this time instead of ABS. This has also held up for me so far with chamber temperatures above 60 degrees.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (42)