Adler

cover

IMG_0435.jpeg

IMG_0434.jpeg

IMG_0433.jpeg

IMG_0431.jpeg

plate_1.png

0c8c716578a1bdb3.jpeg

<ul><li>Material: PETG (Highly recommended for heat/fuel resistance on bikes) or PLA</li><li>Layer Height: 0.2 mm (optimal for text clarity).</li></ul><h3>Multi-Color Setup (Filament Change)</h3>To achieve the two-tone look without an AMS/MMU, use a manual pause and set &#34;print be object&#34;<ol><li>Base (Black): Start with black until the top surface of the plate.</li><li>Color Swap (Green/Red): Set a filament change at the layer where the text begins (should be 3mm).</li><li>Finish: Print the remaining layers in the contrast color.</li></ol>

0.2mm layer, 2 walls, 15% infill

No brain, just Braaap! 🏍️💨 The perfect 2-piece puzzle set for you and your riding buddy. The full truth only shows when the keys are together:<ul><li>Part 1: &#34;Zwei Idioten...&#34; (Two Idiots)</li><li>Part 2: &#34;...ein Gedanke: Vollgas!&#34; (One thought: Full Throttle!)</li></ul>

Motorcycle Partner Keychain Set

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models