Ana Teodoro :p

cover

tempImageONjnUK.jpg

plate_1.png

8546f96ed132b6bf.jpg

0.16mm layer, 1 walls, 30% infill

3D Prince

Copilot_20260429_130203.png

20260427_204848.png

656009280_1271166468022350_3371545384850341175_n.jpg

682700184_1671308503992993_8798737567430455714_n.jpg

Carefully Tuned Supports for Support Removal &amp; Reinforced Cap. many substantial value adding adjustments also that result in low filament material waist and quick print time with reasonably good strength…&nbsp;see the specifics below… Volume modifier added to the cap to add strength.  0.16mm layer height, 1 walls, 0.6mm wall width, 0% infill, wall generator arachne, detect over hang walls off, detect narrow internal solid infill off, ensure vertical shell thickness disabled, acceleration speed [ short travel , initial layer travel, initial layer, outer wall, top surface ] all turned up to 10000mms. max volumetric speed for PLA, and PETG both set to 30mm3/s, cooling for over hangs set to 100%, minimum fan for layers less than 4 seconds 100% and for the other layer times 100% and auxiliary part cooling fan 70%.  note that filament flow, and cooling settings will likely revert to default and acceleration speed will also likely revert to default if you use a different Bambu printer.

Carefully Tuned for Support Removal & Strengthened Cap

user_193791723

image2.jpeg

image0 (2).jpeg

image1 (2).jpeg

Scaled to perfectly fit one ChapStick. Print settings are my own for efficiency.

Scaled For ChapStick

Snooooopy

wechat_2026-04-26_154809_298.png

Parameter optimization, improving printing efficiency

Porta Batom Balm Florzinhas dia das mãesNos siga no Insta: @Anateodorostudio

Little Flower Mother's Day Lipstick Balm HolderFollow us on Insta: @Anateodorostudio

Little Flower Mother's Day Lipstick Balm Holder

ASIA

Print Profile(4)

Description

Comment & Rating (479)

License

Related Models