Log Pot – Scalable Planter/Pen Pot in Wood Style

Simple, natural-looking log-style plant pots with a realistic wood texture.

Designed to be easy to print and scalable to different sizes, these pots work great for succulents, small plants, or desk decor.
Can also be used as a pen and pencil holder or desk tidy.

💧 Leak Test Results:
• Standard mode: Held water for 24 to 72 hours but started to leak towards the end (not guaranteed watertight)
• Vase mode: Not watertight – use with a liner or for low-water plants

Note: Results may vary depending on print settings, material, and printer calibration. For best results and to avoid potential water damage, use a watertight inner pot or liner.
 

Two print options:
• Standard mode (stronger, solid walls)
• Vase mode (fast, low filament, single line width)
 

Scale uniformly in X/Y for different diameters. Z height can be adjusted independently if needed.
Opening dimensions are 100x100x100mm so scale according to what you need. 
If you do scale the print it's a good idea to click on Variable Layer Height set to Quality/speed 0.50 & Radius 5.

Perfect for:
• Succulents
• Desk plants
• Home decor
• Gifts

 Click the Images below to see my other Planters

Also checkout my Rock Pots.
Click on Image below.

Print Settings
Plate 1
Layer height:  0.2mm
Variable Layer Height set to Quality/speed 0.50 & Radius 5
Line Widths set to 1
Walls: 2
Infill: 6% Gyroid
Top/Bottom: Standard (or none for vase mode)

Vase mode: Plate 2
• Spiral vase ON
• 1 wall
• No top layers

Material:
PLA recommended
Brown/wood tones work best