Print Profile(1)
Bill of Materials
.jpg)
Description
Now I’m bringing the Oscar Piastri design so you can use it and give it an even better visual look. I hope you like it, and as always, feel free to share any feedback or suggestions for improvement.
Introduction
This is my first design uploaded to MakerWorld, and I’m very happy to share it. I created this stand to give 1:43 scale Formula 1 cars a clean and immersive display, simulating a presentation similar to a race track. The simple details and the lateral tilt angle provide a unique appearance, making it perfect as a decorative display piece 😊.
Features
- The stand rotates 360° to select the desired viewing orientation.
- The car stand prints in approximately 2 hours and 30 minutes.
- Uses only 3 filament colors.
- Total weight under 60 grams.
- No supports required (a brim can be enabled if necessary).
- Dimensions: 165 × 93 × 50 mm with the base assembled.
- Uses the original screw included with the die-cast car.
- Quick and easy installation.
- Recommended print profile included; parameters can be adjusted to suit your printer.
- Compatible with most Bburago F1 models in 1:43 scale.
⚙️Assembly Instructions
1 Insert the screw into the support piece.
2 Join the support to the base.
3 Leave a small portion of the screw tip exposed to align with the car mounting hole.
4 Attach the car using the same screw.
5 Rotate the support to choose the preferred tilt orientation.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)