Corsair 5000T PSU cutout lightbox

My first design so go easy on me. :-)
This is a simple lightbox for the PSU shroud cutout for the Corsair 5000T cases. This design was created and tested on the newer 5000T LX, however it should work for the older 5000T also. The lightbox is designed to be inserted from the front, and the image cards can be easily swapped out if/when required.

The lighbox is in 3 parts:
1. Front frame - Snaps on to the PSU shroud cutout
2. Lightbox. This contains the LED's and slides into the front frame
3. Image card. This is customisable and slides in between the lightbox and the frame

Any 5v ARGB LED's can be used for this. These are the ones I used:
https://amzn.eu/d/09Zw5rw1

If you wish to create your own image card, dimensions i used are:

145mm x 56mm x 0.5mm

I printed everything in PLA and recommend the use of supports.