王的A1

cover

1.png

3.png

2.png

plate_1.png

螺纹测试

plate_2.png

ba4e1d4913caeedd.png

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>为我助力</boosttitle><boostcontent>好用的话别忘了给我免费助力</boostcontent></boostme><p>本模型为@不放弃的猴子导演原创，这款模型为复刻版，仅供学习交流使用，严禁任何形式的商用，打印配置里有两盘，可先打测试盘确定螺纹连接顺畅再打正式盘，连接不顺畅的话需要根据耗材自行修改，我上传了 STEP 文件。</p>

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If it's useful, don't forget to give me a free boost</boostcontent></boostme><p>This model was originally created by @不放弃的猴子导演. This is a replica, for learning and exchange purposes only. Commercial use in any form is strictly prohibited. There are two plates in the print profile; you can print the test plate first to ensure the thread connection is smooth, then print the official plate. If the connection is not smooth, you need to modify it yourself based on the filament. I have uploaded the STEP file.</p>

I won't fall anyway

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models