Reusable Pet Hair Remover. Pet Hair Roller

🐾 3-Piece Modular Pet Hair Remover Roller (Pet Hair Roller)

This is a functional and robust design for a pet hair remover roller, optimized for easy 3D printing without supports. The design is completely modular, consisting of only three main parts: the Handle, the Axle, and the Roller. The axle fits perfectly into the handle and the roller rotates freely on it.

It is designed so you can wrap the roller with painter's tape. The vertical groove in the roller facilitates the insertion and securing of the cleaning material.

✨ Key Features

• 3-Piece Modular Design: Easy to print and assemble.
• Free Rotation: The roller rotates without friction on the central axle.
• Ergonomic: The handle is ideally sized for a comfortable and firm grip.
• Securing Groove: A vertical groove in the roller allows you to secure the beginning of your adhesive or cleaning material.
• Support-Free Printing: Designed to print all flat parts on the print bed.

🛠️ Recommended Print Settings (Tested)

• Material: PLA is perfect for all parts.
• Infill: 15%.
• Layer Height: 0.2mm.
• Supports: NOT NEEDED. All parts are optimized to be printed without them.

💡 Assembly and Usage Instructions

1. Assembly: Slide the roller onto the axle until it stops. Insert the thin end of the axle into the handle until it fits firmly. Then, ensure it rotates smoothly.
2. Preparation: Wrap the roller with your preferred cleaning material (painter's tape), securing the start in the vertical groove.
3. Usage: Slide the roller with firm movements over your clothes, sofa, or carpet.
4. Cleaning: Remove the used material and repeat. The modular design facilitates disassembly and cleaning of the parts if necessary.

🙌 Share your result!

If you like the design and find it useful, please click "Like" ❤️ and upload a photo of your print. I would love to see your pet hair remover in action!