Delightful Blueberry Earrings (0.2mm Optimized)

Delightful Blueberry Earrings 🌿

Add a touch of nature to your style with these charming, 3D-printed blueberry earrings! Designed to look like fresh-picked berries, this set is a perfect project for those who love detailed, nature-inspired accessories.

Recommended Print Profile

To capture the delicate texture of the berries and the fine veins in the leaves, I highly recommend using the following settings:

• Nozzle Size: 0.2 mm (Essential for fine detail)
• Layer Height: 0.08 mm or 0.10 mm
• Supports: Enabled (Tree supports work best for easy removal)
• Brim: Enabled (Inner and outer brim recommended for small part stability)
• Infill: 8% (Gyroid)
• Material: PLA (Matte Blue/Purple for the berries and Matte Green/Olive for the leaves gives a very realistic look!)

Assembly Instructions

Once your parts are cleaned and ready, gather your hardware for assembly. You will need:

• 6 x 4mm Jump Rings
• 4 x 6mm Jump Rings
• 2 x Fish Hook Style Ear Hook
• 4 x  10x4mm Screw in Eye Pins

1. Lower Berry: Screw Eye Pins into the provided holes, Attach the bottom blueberry and leaf to the end of a 6mm ring.
2. Upper Berry & Leaf: Screw Eye Pins into the provided holes, Attach the second blueberry and another 6mm ring for the leaf.
3. Attaching the berries: Using three 4mm rings, create a chain connecting the two 6mm rings.
4. Final Connection: Attach the top 6mm ring to the loop of your fish hook ear wire.
5. Repeat for the second earring!

If you enjoy this design, please leave a like and share a photo of your successful prints—I’d love to see your finished work!

Happy Printing! 😊