Arthur Matiello

cover

01.png

Sleek (350ml)

plate_1.png

Long Neck

plate_2.png

473ml

plate_3.png

500ml

plate_4.png

70mm

plate_5.png

80mm

plate_6.png

bb4855ec9a7ed938.png

0.2mm layer, 2 walls, 10% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Se curtiu o modelo e quer ver mais versões de times e ideias novas, manda um BOOST 🚀<br>Isso faz toda a diferença pra continuar criando conteúdo gratuito pra comunidade!</boostcontent></boostme><h2>Porta Lata / Long Neck do Fluminense</h2><p>Apresento para vocês esse porta garrafa e porta latão desenvolvido especialmente para torcedores do Fluminense, com <strong>4 modelos inclusos</strong>, compatíveis com diferentes tamanhos:</p><ul><li><strong>Para lata Sleek de 350ml</strong></li><li><strong>Para Long Neck</strong></li><li><strong>Para Latão de 473ml</strong><br><i>Baixando o adaptador disponível no meu MakerWorld, você também consegue usar as latas de 350ml gordinha.</i></li><li><strong>Para Latão de 500ml</strong>, normalmente usado na Europa</li></ul><h3>🎨 Design Premium</h3><p>O modelo foi pensado para trazer um visual marcante, elegante e cheio de identidade tricolor:</p><ul><li><strong>Faixa superior:</strong><br>“Fluminense”<br>“1902”</li><li><strong>Faixas inferiores:</strong><br>“Sou Tricolor de Coração”<br>“Vencer ou Vencer”</li><li><strong>Corpo do modelo:</strong><br>Escudos do Fluminense em baixo relevo, criando um acabamento premium</li><li><strong>Elemento adicional aplicável:</strong><br>Símbolo do Fluminense na frente do copo</li></ul><h3>🔧 Montagem do Símbolo</h3><p>Para aplicar o símbolo no formato do copo:</p><ul><li>Aqueça a build plate a <strong>80°C</strong></li><li>Deixe o símbolo sobre a superfície por <strong>1 a 2 minutos</strong></li><li>Ele irá amolecer levemente</li><li>Molde no corpo do porta lata, espere esfriar e cole</li></ul><h3>🖨️ Configurações de Impressão</h3><ul><li><strong>Bico:</strong> 0.4</li><li><strong>Altura de camada:</strong> 0.16<br><i>Caso o modelo saia com linhas muito aparentes, reduza a velocidade da parede externa e ative a torre de purga para um acabamento melhor.</i></li></ul><h3>⚙️ Estrutura e Resistência</h3><ul><li>2 paredes (walls)</li><li>Infill: 10% Gyroid</li></ul><p>✔ Modelo leve, resistente e funcional</p><p>Caso queira mais resistência, aumente para <strong>3 paredes</strong> e <strong>15% de preenchimento Gyroid</strong>.</p><h3>🔗 Veja meus outros projetos</h3><p>Confira outros modelos disponíveis clicando no meu perfil.</p><h3>🚀 Apoie o projeto</h3><ul><li>Deixa um like ❤️</li><li>Comenta com sua impressão</li><li>E se puder, manda um BOOST 🚀</li></ul><p>👉 Isso me ajuda muito a continuar criando modelos gratuitos pra comunidade</p>

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you liked the model and want to see more team versions and new ideas, send a BOOST 🚀<br>This makes all the difference to continue creating free content for the community!</boostcontent></boostme><h2>Fluminense Can / Long Neck Holder</h2><p>I present to you this bottle holder and can holder developed especially for Fluminense fans, with <strong>4 models included</strong>, compatible with different sizes:</p><ul><li><strong>For 350ml Sleek cans</strong></li><li><strong>For Long Neck</strong></li><li><strong>For 473ml Beer Cans</strong><br><i>By downloading the adapter available on my MakerWorld, you can also use the stout 350ml cans.</i></li><li><strong>For 500ml Beer Cans</strong>, commonly used in Europe</li></ul><h3>🎨 Premium Design</h3><p>The model was designed to offer a striking, elegant look full of tricolor identity:</p><ul><li><strong>Upper band:</strong><br>“Fluminense”<br>“1902”</li><li><strong>Lower bands:</strong><br>“I am Tricolor at Heart”<br>“Win or Win”</li><li><strong>Model body:</strong><br>Fluminense crests in low relief, creating a premium finish</li><li><strong>Applicable additional element:</strong><br>Fluminense symbol on the front of the cup</li></ul><h3>🔧 Symbol Assembly</h3><p>To apply the symbol to the cup shape:</p><ul><li>Heat the build plate to <strong>80°C</strong></li><li>Leave the symbol on the surface for <strong>1 to 2 minutes</strong></li><li>It will soften slightly</li><li>Mold it to the body of the can holder, wait for it to cool, and glue it</li></ul><h3>🖨️ Print Settings</h3><ul><li><strong>Nozzle:</strong> 0.4</li><li><strong>Layer height:</strong> 0.16<br><i>If the model shows very visible lines, reduce the outer wall speed and activate the purge tower for a better finish.</i></li></ul><h3>⚙️ Structure and Strength</h3><ul><li>2 walls</li><li>Infill: 10% Gyroid</li></ul><p>✔ Lightweight, resistant, and functional model</p><p>If you want more resistance, increase to <strong>3 walls</strong> and <strong>15% Gyroid infill</strong>.</p><h3>🔗 See my other projects</h3><p>Check out other available models by clicking on my profile.</p><h3>🚀 Support the project</h3><ul><li>Leave a like ❤️</li><li>Comment with your print</li><li>And if you can, send a BOOST 🚀</li></ul><p>👉 This helps me a lot to continue creating free models for the community</p>

Fluminense Can Holder

ASIA

Print Profile(1)

Description

Fluminense Can / Long Neck Holder

🎨 Premium Design

🔧 Symbol Assembly

🖨️ Print Settings

⚙️ Structure and Strength

🔗 See my other projects

🚀 Support the project

Comment & Rating (18)

License

Related Models