Galaxy watch 6 classic stand Remixed by Joosdt

Remixed by

Joosdt

Household>Other House Models

Print Profile(3)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.12mm layer, 3 walls, 15% infill

Designer

1.5 h

1 plate

5.0(27)

0.12mm layer, 3 walls, 15% infill with tree support

Designer

1.5 h

1 plate

4.3(4)

0.12mm layer, 3 walls, 15% infill

1.8 h

1 plate

Open in Bambu Studio

Boost

134

175

Released

Description

Slightly adjusted the original file.
Closed the side and front holes and scaled the model a bit for a better fit for the charging puck.

It does requires a little foam for a better fit (I used some velvet). This way say the foam can also help prevent scratches.

The file also still works for the Galaxy Watch 5 pro 45mm.

Comment & Rating (35)

@user_2966361958

Boosted

Print Profile

0.12mm layer, 3 walls, 15% infill with tree support

Printed well! works for 43mm version, but i think it's meant for the larger one

@arrowbow21

Print Profile

0.12mm layer, 3 walls, 15% infill

Printer perfectly

@user_1013220320

my first print. Perfekt, thank you.

@XiangAru

Print Profile

0.12mm layer, 3 walls, 15% infill

Works great even for a Galaxy 6 Classic 43mm watch! I added a bit of latex foam ( https://www.amazon.com/gp/product/B08GWP739H ) on the base to cushion it and account for the smaller size. Awesome!

@Denk

Print Profile

0.12mm layer, 3 walls, 15% infill with tree support

Passt nicht mit dem originalen Samsung watch 4 Ladegerät Zusammen

The designer has replied

@Joosdt

Thanks for trying the model. But that's not an issue with the print profile. That's just how the model is. It isn't meant for the watch 4 charger.

(Edited)

@Evostance

Print Profile

0.12mm layer, 3 walls, 15% infill

Worked fine and looks great for Galaxy Watch 6

The designer has replied

@Joosdt

Glad it works for you!

@user_86893870

Print Profile

0.12mm layer, 3 walls, 15% infill

Super convenient, but the cable base tends to lean to left a little bit, not an issue but just wanted to point it

@69reichertm

Print Profile

0.12mm layer, 3 walls, 15% infill with tree support

very nice watch holder good print

@steelsty

Print Profile

0.12mm layer, 3 walls, 15% infill

Its perfect! My Gear S3 came with a stand. It looks the same now

@3dme

Works Great. Did not need foam or anything, perfect fit. For others, Bambu Studio did say I needed to simplify it. I chose medium quality and simplified then sliced. It worked just fine.

(Edited)