Undead Pirate - Le Chuck

The undead pirate - Le Chuck

LeChuck, radiates pure undead menace….

If you grew up playing insult sword fights, this piece is a small tribute to one of the greatest adventure game series ever made. With his signature black beard, piercing black and red eyes, massive pirate hat and dead crow for feathers, he is an ultimate desk top icon and conversation starter.

Perfect for:

• Retro adventure game fans
• Monkey Island collectors
• Your desk, shelf, or gaming altar

NO AMS for easy printing, cut down print times and pure ease of making, no painting just some glue required to keep everything secure!

Note: When assembling the sword/hand slide the brown handle through the hand first then the knuckle sheild after, putting one of the securing pegs in one end of the handle and flexing the sheild onto the top of the handle. This keeps from damaging the fingers as they are thin, due to being skeletal. Sheild is thick enough to not break with light bending (and tough - so get those fingers ready)

Note: When assembling the head, put the top teeth on the peg using the hole, get the lower jaw into position on the beard then fit the top part of the head in place. Secure with glue, then once dried fix moustache, bandana and hat. Seperate head print profile for and AMS version of the head for those that want to print that way.

📌 Recommended printing settings:

• Material: PLA
• Layer height: 0.16 mm
• Infill: 15%
• Nozzle: 0.4mm

supports where nessesary - I have tried to make it so all have a surface contacting the plate however due to the detail and complexity of the modeling they sometimes require alot of support, so be aware and be carefull during support removal. Use a naked flame gentley and for short intervals to clean surfaces after removal

Assembly – Recommended Method on multipart models

• Dry fit: Assemble all parts without glue to check alignment and fit.
• Cleanup: Lightly deburr edges and pegs where nessesary with a file/modeling tool to ensure uniform contact. All parts are tested and fit together.
• Optional fix: Use glue for permanent assembly.
• Small Parts can require tweasers for ease of assembley.

NOT AI, NO AI COLOUR PICS WHICH DISGUISE A POOR DETAILED SINGLE COLOUR PRINT. REAL PRINTED RESULTS!

MOST OF MY MODELS ARE FAN ART RECREATIONS AND ARE FOR PERSONAL USE ONLY  : MY MODELS ARE UNOFFICIAL FAN ART AND ARE NOT AFFILIATED OR ENDORSED BY THIRD PARTY IP HOLDERS

Thankyou to everyone who has rated and boosted my prints, if you like the models and want to continue to support the creation of more please consider boosting, it really does help incentivise the creation of more models for makerworld. 

If you would like to "buy me a coffee" to support the continued creation of fun prints you can do so here;

All of my models posted here are free for you to use commercially for free. I make them as a hobby and a bit of fun, with the points helping supply filament and consumables. All i ask if you wish to support my designs and want to sell them is that you are aware of the IP infringement which apply to some of the models and take appropriate responsibility. Please also boost them as much as you can and help with the points and please correctly attribute the model design to this page in your descriptions etc - Thankyou again everyone!