Fantasy Psychedelic Mushroom Snail pure Brainrot

🍄🐌✨ Tiny shell. Huge vibes. ✨🐌🍄

Meet the Psychedelic Mushroom Snail 🍄🐌✨
A tiny forest crawler with a mushroom shell, chunky cute details, and major psychedelic vibes 🌈🌀💚

Perfect for your desk, shelf, plant corner, or as a gift for someone who loves quirky prints and magical creatures ✨💫

Print it in classic red and white ❤️🤍 or go totally wild with colorful, chaotic, trippy combinations 🌈🔥💜

🍄 Cute
🌀 Psychedelic
🐌 Collectible
✨ Instant monitor / desk buddy

Bring home a tiny trippy forest friend! 🍄🐌✨

Modifications

This model is designed and published in a way that allows you to easily customize it. And I don't just mean the colors!

I've included the parts both combined and separated, so you can easily remove the dots or add more. You can move them around, rotate, or scale them - your imagination is the only limit! ;)

👁 Show others what you've made. Share 👉 your version of this snail 🐌🍄 in the comments!

Printing and assembly guide

The single-color version is very straightforward: it's a single element and an easy print. After printing, WAIT until the material cools down so it's easier to remove from the build plate and supports. Grab the snail by the tail, pull upwards, and gently peel it away from the supports.

The multicolor version is divided into 4 build plates to make changing colors easy.

Dots: Trust the slicer! This is really the best way to print them, and they are incredibly easy to remove from the supports around. Tested successfully even at 50% scale.

💡 Please note: You don't need to print all the dots in the same color! ;)

• You can add one or two dots to your other print jobs to gradually collect them in various colors.
• You can print single-color dots and paint them (white PLA Aero / Matte works great for painting).

Assembly: The parts are too small for printed connectors, so you'll need a small drop of glue to assemble them.

• Some dots can be press-fitted, but not all of them. The best glue to use is CA (superglue) or UHU or similar.
• On my print, the top and bottom parts of the hat can be connected just by pressing them together. If yours don't hold, just use a drop of CA or UHU or similar glue.
• To attach the hat to the snail, I recommend using hot glue eventually slightly melting the PLA.

FAQ:

Why there is no AMS version?

However existing single-color profile should be extra easy to convert into AMS. You can upload Your own printing profile on this model page if you like

Can I customize and publish this model?

No. This model is published under the Standard Digital File License and cannot be distributed, shared, or published in any way.

However, I highly encourage you to customize it for your own use!

I would be thrilled if you shared photos of your unique version in the comments (-:

Thanks for https://emojidb.org/  help me with emojis