Teddy KGB Poker Chip (OREO) tray

I printed in PLA with 0.2mm layer height.

I suggest to print the model sideways, with the text on top, using tree supports.

FOR NON-MULTI-COLOR PRINTERS:

If you wish to print with 2 colors, I added a “sacrifice” part (same height as the chip holder), which needs to be placed in the bottom left corner in your slicer (in my case - CURA). This will take the first “sloppy” extrusion after the filament change. See pictures, showing the “sacrifice” part taking the first filament, after the filament change.