Round Bases for Miniatures (25mm - 150mm)
Print Profile(7)
Description
I tried a bunch of bases online and were never happy with them. I like using magnets for my printed minis for D&D so I made these bases to make that easy to do. There are bases from 25mm (small/medium) all the way up to 150mm (tiamat sized). There are options for different sized magnets as well as no magnets. If you need a bigger size or different magnet size, let me know.
The tolerance for the magnet holes are 0.3mm in diameter and in height.
To add a magnet (do this one magnet at a time so the glue doesn't set witht he magnet in the wrong place):
- Put a drop or two of super glue on a scrap piece of cardboard
- Dab the magnet into the super glue (it helps to hold a long column so you don't get any on your fingers
- Push the magnet a little bit into the magnet hold
- Use pliers to squeeze the magnet all the way in or until it is flush with the edge (do this quickly before the glue sets)
- Once all magnets are correctly in, leave it upside down (magnets facing up) while the fumes from the glue dissipates otherwise a white residue will build up on the plastic
EDIT: I have added 32mm and 60mm sized bases for use with bigger medium-sized and large sized models like those from Artisan Guild.
Base Sizes (Updated 30/4/26):
- Medium 25mm
- Medium 32mm
- Large 50mm
- Large 60mm
- Huge 75mm
- Gargantuan 100mm
- Gargantuan 125mm
- Gargantuan 150mm
Magnet Sizes (Updated 30/4/26):
- 3x3.8mm
- 3x4mm
- 5x1mm
- 5x2mm
- 6x1.6mm
- 6x2mm
- No Magnet
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (8)