H2D/A1 Hotend Adapter for Elegoo Centauri Carbon

This is a model that I redesigned in order to make it more easily manufactured. The model I referenced was from PedrinBeep, and although his model is great, I wanted to be able to machine it in a few simple steps on a bridgeport mill. I have included a pdf drawing which gives you all the dimensions you will need if you would like to tackle the machining at home. 

MODIFICATIONS NEEDED TO PRINTER:

There is a small tab (highlighted in red, please see last picture) that you will have to cut. 

Obviously, you will need a bambulabs h2d/A1 hotend assembly, which you will have to modify in order to adapt to the Centauri Carbon. I have attached a link to PedrinBeep's video which goes over this. Great video, please see below:

PedrinBeep has designed a version which you can easily order off of PCB way if you don't feel like machining it yourself. I have linked his video on that below:

I want to give a huge thanks to PedrinBeep for spending all the time he has on this project. He is the reason that I wanted to go forward with this project.

Please feel free to reach out with any questions or concerns. Thank you!