Modular Indoor Plant Trellis

This modular plant trellis is designed to expand up to four units high to support small, medium and large climbing or vining plants. There are two build plates, one with the main trellis part, plus caps for the top and stakes for the bottom to facilitate placing the trellis in the soil of a medium to large plant pot.

To create a taller trellis, just print additional trellis sections.  I suppose you could print as many as you want, but I feel like three more (for a total of four units high) is the tallest it can be and still retain structural integrity.  Four units tall is actually quite tall (see the pictures).

When printing, I recommend a high-tack build plate, like the Cool Plate Super Tack to ensure good adhesion of the long sections during the print.  If you are using another kind of build plate, I recommend using glue to help ensure adhesion.

Note regarding supports:

To maximize the support needed for the socket/recess at the top of the main trellis while still allowing fairly easy support removal, I forced hybrid tree supports and added support blockers (the  translucent red blocks that appear in the Prepare tab in Bambu Studio).  You don't need to remove those blocks, they don't print.  They just limit the area where the supports are created and help make support removal easier without negatively impacting quality of the print.

Have fun and happy printing!