belt sander knife sharpener

This is a knife sharpening tool for a central machinery harbor freight belt sander. the pictures above show how to assemble it properly. you will need super glue and ¼ bolts as shown above. I did cut the screws with linemen pliers and glued them in, and be sure not to get super glue on the threads or it will not thread properly. you will also have to glue in the stopper which is the little rectangle piece that stops the whole tool from falling. This tool can go on and come off the belt sander very easily if you do not get the slide clogged. to attach you may have to take the belt off but not always necessary. If you need really sharp angles, The table will hit the belt before you reach them so you will have to turn on the belt sander and lower the angle finder and let it sand away material, though this is not the ideal thing to do. hope you can put it to good use.