Five in a Row: Extended Edition (80 Blocks)

Bring the classic strategy game to a whole new level! If "Connect 4" feels too small and games end too quickly for you, this model is designed for you. With an expanded board and capacity for 80 blocks, complexity increases and fun multiplies.
🌟 Main Features
Epic Games: Thanks to its large capacity, games are much longer, allowing for the development of complex strategies and multiple fronts of attack.
Smooth Sliding Mechanism: The design of the vertical rails allows the blocks to fit and slide precisely.
Minimalist and Functional Design: Clean aesthetics that fit in any game room or desk.
Optimized for 3D Printing: Parts designed to be printed with minimal or no supports (depending on orientation), ensuring easy assembly.
🛠️ Model Specifications
Total Capacity: 80 blocks (40 blue / 40 red).

Block System: Square blocks with a rear safety tab to prevent them from accidentally falling out of the track.

💡 Printing Tips
For best results on your Bambu Lab or other printer:
Material: PLA is ideal for its rigidity and variety of colors.
Tolerances: The model is adjusted for smooth sliding. If your printer tends to over-extrude, I recommend slightly reducing the flow rate for the blocks.
Infill: A 15% Gyroid infill is sufficient for the board, giving it robustness without wasting excessive material.
Layers: 0.2mm layer height for a perfect balance between speed and detail.
🏆 How to play?
The rules are the same, but the challenge is greater: try to connect 5 blocks of your color horizontally, vertically, or diagonally before your opponent. With 80 pieces in play, you cannot let your guard down for a second!
Do you like the design? Don't forget to Like ❤️, add it to your Collections, and upload a photo of your print (Make)! I would love to see your color combinations