Very heavily armored Brutus soldier

Here is my latest project: an armored warrior inspired by classic grimdark sci-fi universes

The basic design was generated and prepared with the help of artificial intelligence, and then hand-finished in ZBrush and Blender. This process allowed for deduplication, cleaning geometries, optimizing proportions, and removing crude errors from the generated model to achieve the cleanest and most pleasant result for printing

Printing and Post-production

The model was successfully tested and printed on my Bambu Lab A1 mini

⚠️ Caution when removing supports: Given the complexity of the model and the presence of fine details (especially the front skirt), I recommend removing supports with extreme caution. I strongly advise using precision tweezers and sharp modeling knives. Proceed slowly, starting from the less visible areas, to avoid damaging the most fragile parts. Haste and force are not your friends; calmness, patience, delicacy, and the model will emerge from its protective cage safe and sound

Printing Tips

• Printer: Bambu Lab A1 mini
• Material: PLA (or material of your choice) I used Sunlu's PLA+ 2.0 gray, but any defined PLA is perfectly fine
• Supports: Necessary (it is recommended to use the attached profile for easy support removal; if you want to do it yourself, I advise using organic/tree supports to facilitate removal)

I hope you enjoy this model as much as I enjoyed creating and printing it!
If you print it, don't forget to upload your photos; I'm curious to see your creations.
I remind you that I share these models for non-profit purposes, but solely for my passion, for my miniature collection, and to keep my printer busy, trying to push the technical level that the A1 mini hardware can give me to its maximum

Happy printing!

This is a fan‑inspired sculpt. This model is not affiliated with, endorsed by, or associated with any movie franchise or studio.
 

Update 1:

Print profile modified, added a plate with the whole figurine and one with the figurine in pieces to be glued. Printing in pieces improves quality (fewer supports) but needs to be glued.
 

Sci-fi/fantasy display model designed for 3D printing. 

Powered by MakerWorld-Image-to-3D (https://makerworld.com/makerlab/imageTo3d)

This is a fan‑inspired sculpt. This model is not affiliated with, endorsed by, or associated with any game, movie, brand, or franchise owner.
It does not represent any official character, unit, vehicle, or product

Click here to see my models