Yi Cam for AMS Riser V4 (P2S, X2D, X1C, P1S)

I tried using Beerman’s Yi Cam AMS Riser V2 (P1S/P1P/X1C) with my P2S AMS Riser V4 by benlevi (should work for X2D, X1C, P1S V4) , but I wasn’t able to reinstall the glass cover properly (it only worked with the AMS Riser Shelf). So, I decided to remix the design.

Printed initially in PETG since whole RISER was printed in PETG, but should work fine with PLA.
My version is slightly taller than Beerman’s, with an adjusted angle. It now works well with my P2S and i beleive should work with X1C, P1S, X2D V4. The glass still lightly touches the Yi Camera (check pictures), but this was the only way to achieve the maximum field of view.
I only designed the left side and mirrored it for the right. If you print the right side, feel free to share your results.
I kept the original honeycomb structure since it’s the reinforced V2 (the V4 version is purely decorative).
Note: The Yi Home app can be quite annoying due to frequent subscription prompts. I found that using the Kami app (iOS) reduces these ads, and I’ve read that TinyCam Monitor (Android) removes them entirely.
Why I chose the Yi Cam: I wanted a camera that stays out of sight (not mounted on the glass door or top panel), and Beerman’s design was the best solution I found.