Star Wars The Vintage collection X-Wing Wall Mount

Hi! Thanks for checking out my design for a wall mount made for the Vintage collection Luke X-Wing by Hasbro. 

I was looking to mount this ship to my wall but couldn't find any mounts for it so naturally I decided to download fusion360, learn the basics and get to work. 

PLEASE NOTE - Removal of the ship side mount is NOT easy once installed. It will require care and a little prying to remove as there is little wiggle room. If using screws to mount to the wall, you must ensure the screws sit FLUSH with the mount in order to allow the ship to slide down onto it. If using VHB tape, ensure both the wall mount and mounting surface are free of any dirt/oils. 

Clip the mount and wall spacer between the wings on the underside of the ship, attach the wall mount to the wall, slide the ship on and boom! Job's a gooden! The order these are attached can be flipped to have the ship point up or down etc. I printed this out of PLA but I would recommend to print out of PETG to maybe add a little flex to make removal from the ship a bit easier if need be and with inner/outer/inner wall order to ensure dimensions are as spot on as they can be.

It can be mounted to the wall using the included screw holes or the option I decided (because I'm too lazy to get the drill out), 3M VHB double sided tape, the strong stuff!

I hope you enjoy the mount! Let me know what you guys think, any feedback is welcomed!