Das Sams Tonies Collection
Print Profile(1)
Description
4 Custom Tonies from “Das Sams”:
- Das Sams
- Mr. Bruno Taschenbier
- Ms. Annemarie Rotkohl
- Martin Taschenbier
The design is based on the classic Tonie figures.
My print profile includes the single-color custom Tonie with a base (two-part). However, I have also uploaded the original, unoptimized, raw models (reduced multicolor, without a base).
Base and figure must be glued together. The base can accommodate an NFC tag with a maximum diameter of 39mm and circular magnets with a maximum diameter of 10mm (max. 5.5mm height).
For the Custom Tonies to work with an original Toniebox, an alternative solution like teddyCloud or teddyBench is needed.
Additionally, a compatible RFID tag is required (without guarantee):
- ICODE SLIX-L
- RF interface: ISO/IEC 15693
- Frequency: 13.56 MHz
More info here:
https://tonies-wiki.revvox.de
https://github.com/toniebox-reverse-engineering
Alternatively, the figures can also be used for your own DIY Toniebox projects, e.g., based on an Arduino:
https://www.voss.earth/tonuino/
Or simply as “normal” tabletop miniatures.
I recommend printing with TPU A95, as the material is closest to the original and significantly less prone to breakage than PLA.
Of course, all other common materials are also possible.
Powered by MakerWorld-Image-to-3D (https://makerworld.com/makerlab/imageTo3d)
Boost Me (for free)
If you like the model, I would be very happy about a Boost!
This supports my work and helps me to create more models.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)