Woh_George_Designs

cover

IMG_1161.jpeg

IMG_1153.jpeg

IMG_1156.jpeg

IMG_1177.jpeg

IMG_1169.jpeg

IMG_1163.jpeg

IMG_1181.jpeg

IMG_1184.jpeg

IMG_1185.jpeg

plate_1.png

IMG_1151.jpeg

IMG_1170.jpeg

IMG_1155.jpeg

<h2>Strong Guitar Hanger – Print Profile</h2><h3>Wall Mount (Print-in-Place)</h3><p>This profile is optimized for <strong>strength, surface finish, and reliable load-bearing performance</strong>.</p><h3>Key Settings</h3><p><strong>Arachne Wall Generator</strong><br>Improves wall consistency and strength, especially around curved and load-bearing sections.</p><p><strong>4 Walls (Perimeters)</strong><br>High wall count significantly increases structural strength and durability.</p><p><strong>16% Infill</strong><br>Balanced to support internal structure without excessive material use.</p><p><strong>Variable Layer Height</strong><br>Enhances surface quality on curved regions while maintaining efficient print time.</p><p><strong>Z-Axis Surface Smoothing</strong><br>Reduces visible layer stepping for a cleaner finish on contact surfaces.</p><h3>Important Note</h3><p><strong>Screw Hole Modifiers</strong><br>Mounting holes are generated using negative part modifiers.</p><p>If resizing the model:</p><ul><li><strong>Scale only the hanger body</strong></li><li>Avoid scaling the negative modifiers directly, or hole dimensions may become incorrect</li></ul><h3>Material Recommendations</h3><ul><li><strong>PLA</strong> – Suitable for most indoor use</li><li><strong>PETG or stronger materials</strong> – Recommended for added durability and long-term load support</li></ul><h3>Printing Tips</h3><ul><li>Print flat for maximum strength</li><li>Ensure good layer adhesion (critical for load-bearing use)</li><li>Avoid low wall counts — strength depends heavily on perimeters</li></ul>

4 walls, 16% infill

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

This user content is licensed under the MakerWorld Exclusive License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If this was useful in your setup, boost it. Your support keeps me sharing and refining models.</boostcontent></boostme><h2>Strong Guitar Hanger – Wall Mount (Print-in-Place)</h2><p>A durable, print-in-place wall hanger designed to safely support guitars and similar instruments.</p><p>Built with reinforced geometry and smooth contact surfaces, this hanger provides reliable support while protecting your instrument from scratches.</p><figure class="image image_resized image-style-side" style="width: 34.88%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002688619/design/b98ca5658b55f941.png"></figure><h3>Features</h3><p><strong>Reinforced Structure</strong><br>Integrated cross-bracing increases rigidity and load capacity, making it suitable for heavier instruments.</p><p><strong>Wide Neck Support (55 mm)</strong><br>Designed to accommodate classical and acoustic guitar necks comfortably.</p><p><strong>Smooth Contact Surfaces</strong><br>Rounded, polished geometry helps prevent scratches or pressure damage to your instrument.</p><p><strong>Secure Wall Mounting</strong></p><ul><li>Uses <strong>2 × M5 screws</strong></li><li>Mounting holes are included as negative geometry, allowing easy resizing if needed</li></ul><p><strong>Print-in-Place Design</strong><br>Single-piece print with no supports required.<br> </p><p><img class="image_resized" style="width: 42%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000002688619/design/08922b6975a80079.png"></p><h3>Ideal For</h3><ul><li>Acoustic guitars</li><li>Classical guitars</li><li>Ukuleles</li><li>Tools or equipment with hanging heads</li></ul><h3>Printing</h3><ul><li><strong>Recommended: 4+ walls</strong> for strength</li><li>PLA works for most indoor applications</li><li>PETG or stronger materials recommended for added durability</li></ul><p>Print flat with no supports required.</p><h2>Important Notes</h2><ul><li>Ensure proper wall mounting into studs or appropriate anchors</li><li>Do not rely on drywall alone for heavy instruments</li><li>Check fit and load before long-term use</li><li>.STEP file included to allow further modification if desired</li></ul>

Strong Guitar Hanger - Wall Mount (Print In Place)

ASIA

Print Profile(1)

Bill of Materials

Description

Strong Guitar Hanger – Wall Mount (Print-in-Place)

Features

Ideal For

Printing

Important Notes

Comment & Rating (3)

License

Related Models