Rigdig R4512 Zero Clearance stack dado insert
Print Profile(1)
Description
Here is the latest version of my zero-clearance insert. However, it is for a maximum one-inch dado blade
I wanted to make it so that we have a central plate and inserts that would be changed instead of the entire plate. This would reduce print time and also the amount of filament used
I also used PETG at first and one in PLA, and the latter inserted less easily than the PETG one. I strongly recommend making it in PETG. I used 45% infill for these and 3 outer walls
I used ABS glue to join my main plate. The insert is one piece. At first, I had made it in two pieces, but it proved difficult to change and separated at the joint. Hence the idea of making it in one piece. If you position it at 45 degrees on the print bed, it is very snug but still works
Otherwise, what else is there to say. It's really not complicated
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (1)