Search models, users, collections, and posts
H2 Series Exhaust port + tube 100% 3d printed
Remixed by
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
14.2 h
2 plates
Open in Bambu Studio
Boost
3
6
0
0
1
0
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Bambu Filaments
Select all
Description
Complete Exhaust System for Bambu Lab H2 Series Printers
This is a 100% 3D-printed exhaust system designed for simplicity and ease of use. It requires no extra hardware or complicated tools to assemble and install.
Features & Installation
- Snap-Fit Design: Assembly is incredibly simple; every component is designed to snap together securely.
- Universal Mounting: You can attach the exhaust port to the printer using double-sided tape or screws.
- Optional Hardware: While the port includes screw holes for a permanent fit, screws are entirely optional. Double-sided tape is more than sufficient for a secure hold.
Recommended Print Settings
To ensure the longevity and heat resistance of the system, I strongly recommend using the following materials:
- Recommended: PETG, ABS, or ASA.
- Note: Since the exhaust air can get warm during long prints, these materials will prevent the port from warping over time. Avoid using standard PLA for this specific part.
90º Adapter for 150mm hose
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)