Simple Microscope Light Adapter (Mechanic LS720)
Print Profile(1)
Bill of Materials
Description
I discovered after purchasing the light that it is not compatible with my microscope. So with that I decided to make this simple model to adapt the sizing of the microscope and light opening.
The light is Mechanic LS720+ and the microscope is one of those cheaper ones from Aliexpress, I doubt sizes of lenses, threads and lights change too much. Make sure to measure yours before printing. I have included pictures of measurements and exact model sizing below.
Screw hole size - 2.9mm (M3)
Outer diameter (light inner diameter) - 55.9mm
Inner diameter (microscope lens thread) - 28mm
Thickness - 14mm
Make sure to use PETG for temperature resistance because LEDs can really warm up and use at least 4 wall loops to avoid screws punching through.
The .3mf includes all of my preset settings which I used.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)