Line 'Em Up: Modular Pistol Rack v4
Print Profile(10)
Description
Version 4.0
Improvements in version 4.0:
- Rebranding this model as the Line 'Em Up system.
- Minimal small parts.
- Use the MakerWorld Customizer to make your own toppers and magazine sled. The universal topper was a little flimsy and prone to deform after repeated use.
- Main tower supporting the pistol has tight tolerances but the sled can still be easily moved. Lock it in place witht he tab lock.
- Topper retention pin is thicker and makes solid contact with the tower base. Can be easily removed without fully taking the whole thing apart.
- Tower base labels can be pushed from the back to remove without marring them.
- All components are based on a 7mm unit size. The length of the trays and sleds are multiples of 7mm.
Boost Me (for free)
Much appreciate the support.
Added some magazine holders for AR15: here
Customize with logos:
I like putting logos on things which can be done in Bambu Studio.
You can right-click on a surface to “Add Part” or “Add Modifier”. Select your preferred SVG file with image you want on the part.
Rotate and position the SVG on the face. You can scale the image using the slider in the settings next to the “Size” box. Also be sure to change the depth. It defaults to 10mm. My models have a 1mm raised logo.
When you change the Process viewer to Objects, the SVG shows as a separate item. You can change the color of the entire SVG here. It takes several clicks on the filament to get the dropdown choices.
What to print:
- Choose a tray size. All tray print profiles are prefixed with (A). Several variants available based on your print bed size (see table below).
- Choose a base tower from “B. Tower Bases”
- Choose a topper from “C. Tower Toppers”
- Optionally choose a magazine sled from “D. Mag Sleds”
Tray sizes and compatibility:
| Print Profile Name | Printer Series | Units | Inner mm | Overall mm |
| A. Tray A1-Mini | A1 Mini | 26 | 182 | 185.5 |
| A. Tray 227.5 | X/P Series | 32 | 224 | 227.5 |
| A. Tray 248.5 | X/P Series | 35 | 245 | 248.5 |
| A. Tray 269.5 | H2 Series | 38 | 266 | 269.5 |
| A. Tray 311.5 | H2 Series | 44 | 308 | 311.5 |
| A. Split Trays 311.5 | X/P Series | 44 | 308 | 311.5 |
| A. 4xTrays | H2 Series | 4-as-1 variants of the 32u and 35u trays that will not fit on an X/P series | ||
Customizer Settings:
I have pre-made some toppers and mag sleds (C and D print profiles). Use the following as reference for your own needs:
Toppers:
| Pistol | Deck Width | Deck Height | Chamfer Length | Fillet Radius | Tower Base Height | Overall Tower Height |
| 1911 with Magwell | 25 | 99 | 5 | 65 | 130 | |
| BB19X | 26 | 88 | 2 | 50 | 115 | |
| HK USP Compact | 29 | 84 | 3 | 50 | 105 | |
| Kimber 2K11 with X300 | 37.5 | 80 | 8 | 65 | 115 | |
| P320 Flux Raider | 37 | 85 | 2 | 50 | 105.5 | |
| P365 Flux | 37 | 74 | 1 | 50 | 95 | |
| Prodigy with X300 | 37.5 | 85 | 8 | 65 | 115 | |
| PSA Dagger Compact | 26 | 80 | 2 | 50 | 105 | |
| S&W Model 629 Competitor | 24 | 107 | 3 | 65 | 130 | |
| S&W Model 586 (.357 Mag) | 18.75 | 108 | 8 | 65 | 130 | |
| Sig P320 X5 with Magwell | 28 | 97 | 3 | 65 | 120 | |
| Sig P322 | 27.5 | 95 | 5 | 65 | 120 | |
| Sig P365 Compact | 23.5 | 64 | 3 | 30 | 95 | |
| Sig P365 Xmacro w/ Magwell | 24 | 87 | 3 | 50 | 115 | |
| Taurus TX22 | 25 | 95 | 2.5 | 65 | 115 |
- Set either UseChamfer or UseFillet to “1” to indicate how the deck edges will be rendered. Fillets are rounded for pistols without dust covers.
- “Deck ChamferFillet” are used with either option
- Set the Tower Base Height to whichever one you need from the “B. Tower Bases” print profile. I found that small concealed carry pistols need the 30mm height; compact 3-4 inch barrelled pistols need the 50mm height; and full size 5-inch barrel pistols and revolvers need the 65mm height.
- Deck Height and Overall Tower Height are calculated from ground, which includes the height of the tower base.
Magazine sleds:
| Mag Sleds | Depth | Width | Gap | Radius Front | Radius Rear | Height |
| 1911 | 35 | 14.2 | 8 | 5 | 1.5 | 40 |
| TX22 | 30.25 | 16.25 | 13 | 1 | 1 | 40 |
| P322 | 31.75 | 19 | 5 | 4 | 4 | 40 |
| P365 | 32.5 | 21 | 10 | 6 | 1.5 | 40 |
| P320 | 32.5 | 22 | 10 | 5 | 2 | 45 |
| USP-C 9mm | 33 | 22.5 | 8 | 4 | 1.5 | 40 |
| Glock | 33.5 | 23.25 | 9 | 5 | 1.5 | 40 |
| 2011 | 35.25 | 24.75 | 9 | 8 | 3 | 55 |
I used a tool like this RadGauge to help determine the front and rear edges of my magazines.
Design Highlights:
Retention pins:
Label removal holes:
Toppers and bases printed with their sizes to help match after printing:
Longer trays allow for magazines to be store behind the pistol:
Revolver quick loaders can be stored in front of the tower:
I could not use the name or logo of this manufacturer since one of my models was taken down by their request.
Membership
Donate to my habit or obtain a license to print and sell any of my models.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (21)