Daiki Aomine - Kuroko no Basket - Hueforge
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 198.98x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.4mm and the Actual Depth is 2.5mm
Filaments Used:
PLA PolyLite White Transmission Distance: 5
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA Kexcelled Brown Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 7
PLA PolyLite Beige Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 7 unique filaments
Swap Instructions:
Start with White
At layer #6 (0.56mm) swap to Black
At layer #12 (1.04mm) swap to Blue
At layer #16 (1.36mm) swap to Brown
At layer #19 (1.6mm) swap to Orange
At layer #21 (1.76mm) swap to Beige
At layer #26 (2.16mm) swap to Red for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)