Lawn Sprinkler - various designs

I have created two different sprinkler base bodies: one with a 3/4" external thread and one with a ground spike and hose coupling. Inserts with 90°, 180°, 270°, and 360° spray angles can be used in both base bodies. Usually, the inserts hold mechanically and can then be replaced. However, I recommend gluing them in.

The sprinkler base body is divided into three parts for better printability and must be glued together.

Update 05/30/2026:

I have created a new version with screw-in nozzles and a hose connection. The individual base bodies and nozzles are divided onto separate print plates to make it easier to select what to print.