Mounting bracket / plate replacement for Wild Man V31 Bike Pouch

If you happen to have the same bike bag that I have (Brand: “Wild Man”, model: V31) then you might have run into the same issues that I did. The mounting plate is fairly thin and weak, and can crack due to impact.

This is a replacement bracket that replaces the original mounting plate. You will need to remove the original plastic by carefully removing the sewing threads.

Included are three parts:

1. Outer plate (for mounting to the bike)
2. Inner plate (for clamping to the Outer plate)
3. Drilling guide plate (for drilling holes to allow screws to pass through)

Additional hardware required:

• 3 x M4 nuts
• 1 x M4x14 countersunk screw; and
• 1 x M4x18 countersunk screw.

Outer_plate needs to be printed with supports (recommend using Organic supports).