Harry Potter Wand Improved Version

Original author: https://makerworld.com.cn/zh/models/2158856-ha-li-bo-te-mo-zhang?from=search#profileId-2421848

Because the version they released was not compatible with the A1 series, I disassembled and optimized the handle and wand body, choosing vertical printing to maintain a smoother and finer finish for both the handle and wand body. First, before printing, make sure your build plate is clean to prevent collapse. Because it's a split-part print, we have more options. 1. To maintain its sturdiness, it is recommended to print the wand body with PETG (it is recommended to change the top shell to 4 layers). 2. Because the wand body is very thin and easily broken, the split design conveniently allows for printing the wand body separately or matching any color you like. Of course, silk material looks more beautiful and delicate. To make the handle's texture more three-dimensional, I used a 0.2mm layer height. If you prioritize tactile experience, you can adjust it to 0.16mm. The two main body holes are very precise, so normal handling is not an issue. If you need it to be more secure and not come off when shaken vigorously, please use glue to bond them. When removing supports from the handle, there might be some burrs or marks. You can light a lighter and quickly heat the uneven areas back and forth. For connection, please refer to the two red circles in the image below for alignment and insertion.