Opel / Vauxhall Corsa E Rear Seat Latch Cover
Print Profile(1)
Description
A replacement cover for the rear seat latch as used in Opel / Vauxhall Corsa Model E and maybe others. It snaps in place easily and only needs minimal supports during printing.
If you need to remove the original one, the hooks will break. In my case, it happend during the repair of the latch itself, a common issue as the bolt can unhook itself.
Printing:
- Use PETG, ASA or ABS. The part needs to flex a bit and withstand the summer heat inside a car, so PLA will not cut it!
- Don't change the 45° printing orientation as specified in the print profile, as it maximizes strength and minimizes support needs!
Please rate the print profiles, it helps a lot. Don't hesitate to comment if you have questions, I will read them. Thanks :)
Boost Me (for free)
Leave a boost if you like the model, it's free and encourages more designs!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)