No-Drill Towel Holder - Bathroom Organizer

Minimalist towel holder designed for quick and easy printing.

This model is optimized for:

- Support-free printing
- No assembly required
- Fast print (~3.5 hours)
- Low material usage (~86g PLA)

Mounting:

Designed for adhesive mounting using double-sided tape (tested successfully).
The back features:
- a recessed area for adhesive pads or tape
- a textured surface to improve adhesion

Ideal for clean installation on tiles or smooth surfaces.

Print Notes:

- Print flat on the bed
- No supports required
- Works well with PLA
- PETG recommended for humid environments

Print Settings:

- Printer: Bambu Lab P2S
- Nozzle: 0.4 mm
- Layer Height: 0.24 mm
- Infill: 10% Gyroid
- Walls/Perimeters: 3
- Top Layers: 4 (~1 mm)
- Bottom Layers: 3
- Top/Bottom Pattern: Monotonic
- Supports: No
- Print Orientation: Flat on bed
- Material: PLA (Geeetech Basic)

Note:

Use strong double-sided tape and apply on a clean, dry surface for best results.
Adhesion strength depends on surface and tape quality.

Designed because I couldn’t find a simple and clean solution on MakerWorld.

Simply print and use – no post-processing required.

---

Matching Model

This model is part of a matching set.
 

Check out the smaler version here:
https://makerworld.com/de/models/2683560-minimal-adhesive-wall-hook-no-drill-towel-holder#profileId-2972377

Both designs share the same style and work perfectly together.