Hook-Tensioner for rope or elastic bungee cord

Hook-Tensioner for 8mm thick ropes or elastic bands, able to enlarge or reduce the model from the slicer for each size. Within the print profile there are 4 plates, No. 1 is the most recommended as it prints completely in one go with a small amount of supports that I recommend not modifying as these work best and leave the fewest marks on the part, allowing any small marks that may remain to be lightly sanded. No. 2 has a small base that allows it to be printed without supports and the result is also good if you do not want to do any post-processing. No. 3 is divided into 2 pieces to be printed on their faces, giving a cleaner result on them but then they would have to be glued and perhaps be less resistant. No. 4 is the original piece in case you need to modify the size or do your own tests. I recommend using PETG or ABS for greater resistance, but I have also tried PLA and the result is also good if it is not going to be exposed to the sun. If you liked the model GIVE ME A BOOST!