cantstopprinting

cover

IMG_20260419_113622.jpg

IMG_20260419_113532.jpg

IMG_20260419_113541.jpg

IMG_20260419_113552.jpg

IMG_20260419_113601.jpg

IMG_20260419_113823.jpg

IMG_20260419_113818.jpg

IMG_20260419_113659.jpg

IMG_20260419_113810.jpg

makerlab

plate_1.png

6499719cb1ff5413.jpg

IMG_20260419_113807.jpg

<h2>⭐ <strong>PRINT PROFILE — RAGUEL (SERIES II)</strong> ⭐</h2><h3><strong>Material</strong></h3><ul><li>PLA / Marble PLA / Matte PLA</li><li>Bambu Yellow (sandstone tone works really well for the stone aesthetic)</li></ul><h3><strong>Printer Setup</strong></h3><ul><li><strong>Bambu P1S — Standard 0.4 Nozzle Profile</strong></li><li>No special tuning required beyond support adjustments</li></ul><h3><strong>Layer Height</strong></h3><ul><li><strong>Adaptive Layer Height ON</strong><ul><li>Range: <strong>0.08 – 0.24 mm</strong></li></ul></li></ul><p>Keeps engravings clean while speeding up larger surfaces.</p><h3><strong>Supports</strong></h3><ul><li><strong>ON — Required (Support Heavy Model)</strong></li></ul><p>This model includes:</p><ul><li>layered wing structures</li><li>integrated halo support</li><li>tight rear geometry</li></ul><h3><strong>🔧 Key Setting (Recommended)</strong></h3><ul><li><strong>Top Z Distance: 0.265 mm</strong></li></ul><p>👉 This is important for:</p><ul><li>cleaner support breakaway</li><li>less damage around halo + wings</li><li>easier cleanup overall</li></ul><h3><strong>Support Settings</strong></h3><ul><li>Density: <strong>12–15%</strong></li><li>Interface: <strong>ON</strong></li><li>Style: Default / Snug</li><li>Overhang Threshold: <strong>45°</strong></li></ul><p>Support modifiers already help in key areas, but take your time removing.</p><h3><strong>Support Removal Tips</strong></h3><ul><li>Peel, don’t pull</li><li>Start from outer edges</li><li>Be careful around:<ul><li>halo connections</li><li>inner wing curves</li></ul></li></ul><p>This one rewards patience.</p><h3><strong>Infill</strong></h3><ul><li><strong>12–15% Gyroid</strong></li></ul><p>Good balance of strength and weight.</p><h3><strong>Walls &amp; Top Layers</strong></h3><ul><li>Walls: <strong>3</strong></li><li>Top Layers: <strong>4–5</strong></li><li>Bottom Layers: <strong>4</strong></li></ul><h3><strong>Speeds</strong></h3><ul><li>Standard P1S speeds are fine</li><li>Optional: slow outer walls slightly for a cleaner finish</li></ul><h3><strong>Cooling</strong></h3><ul><li>Default cooling</li><li>100% fan after initial layers</li></ul><h3><strong>Bed Adhesion</strong></h3><ul><li>Textured plate recommended</li><li>No brim needed in most cases</li></ul><h3><strong>Final Note</strong></h3><p>Series II pushes more detail than the original set —<br>so supports are part of the process.</p><p>Take your time on cleanup and this one comes out solid 👍</p>

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h2><strong>📌 Description</strong></h2><p>Series II continues.</p><p>Raguel brings something different to the lineup — less flow, more control.<br>This one is all about symmetry, structure, and that “cosmic law” presence. You’ll notice it straight away next to Metatron and Sandalphon… it sits heavier, more grounded.</p><p>Wings are more rigid, armor is cleaner, and the whole sculpt leans into balance over movement.</p><h2><strong>⚠️ Print Notes (Important)</strong></h2><p>This is another <strong>support-heavy S2 model</strong>.</p><ul><li>Thick wing structures</li><li>Integrated halo support</li><li>Tight geometry around the upper back</li></ul><p>👉 Take your time on removal — especially around the halo and inner wing sections.</p><p>I’ve already adjusted supports after testing to make cleanup easier, but this is still a <strong>slow removal job, not a rip-and-go</strong>.</p><h2><strong>💡 Worth It</strong></h2><p>Once cleaned up, this one really hits.</p><p>The symmetry reads properly, the stance feels solid, and it balances out the S2 lineup nicely — especially next to Metatron.</p><h2><strong>📐 Print Settings (Quick)</strong></h2><ul><li>12–15% infill</li><li>Adaptive layer height</li><li>Supports ON</li><li>Top Z distance slightly increased for easier removal &lt; 0.265 &gt;</li></ul><h2><strong>📸 Final Thought</strong></h2><p>Series II is definitely a step up in detail — that’s the trade-off.<br>More cleanup… but a stronger end result.</p><h2><strong>👉</strong></h2><p>If you’re building the full set…<br>you already know 😏</p><p><strong>Print Raguel, line him up with Metatron and Sandalphon, and complete the S2 trio.</strong></p><p>Would love to see your prints — drop them in the makes 👇</p>

Raguel Arbiter of Harmony Divine Balance SERIES II

ASIA

Print Profile(1)

Description

📌 Description

⚠️ Print Notes (Important)

💡 Worth It

📐 Print Settings (Quick)

📸 Final Thought

👉

Comment & Rating (0)

License

Related Models