X2D Ultra-thin External Exhaust Port - 80mm

• Many new users are printing this model, please note that the textured build plate that comes with the machine has weaker adhesion, wash it thoroughly with dish soap before printing. Applying Deli solid glue or bed adhesive to the build plate surface can further increase stability
• A better method is to buy an official PRO stabilization build plate, or a third-party Bi-Chu Glacier (when printing, still select the textured build plate and click ignore after the build plate recognition error, I am currently using this for my X2D)

When I got the X2D, it came with an air purification box

But I still wanted to connect a hose for external exhaust because I had already prepared the ducting

I found that the purification box was very similar in size to the P2S, and the P2S official exhaust hose was too thick, taking up a lot of wall space, so I made this ultra-thin, easier-to-install, hardware-free exhaust port

Of course, to make it as thin as possible, I sacrificed some ventilation performance, but the machine's filter box itself has a fan, so there's no problem, and my current use is very smooth

____________________________________________________________________________________

All the designs and models here are handmade, without using AI.