Cyberpunk 2077 - Kang Tao A-22B Chao
Print Profile(1)
Bill of Materials
.jpg)
Description
The A-22B Chao pistol.
Probably the weirdest pistol in the game, considering the barrel is the magazine.
Printed with PLA:
- Hatchbox Metallic Brass
- Hatchbox Metallic Black
Barrel/Magazine is fully removable, you will require 2 12x6mm magnets to keep it place.
The holder is also fully movable.
Please look at the GIF in the pictures for the assembly guide. While the instructions are there, I will put some tips and directions below to achieve the best result.
Boost Me (for free)
If you like the model, a boost is appreciated.
Assembly tips:
- Before putting the second face, put some blue on the front part. The grip pieces will hold the back side, but there's nothing to hold the front.
- The front grip needs to go in at an angle. If it does not, a bit of sanding on the top part (where the lines create the stairwell) will help.
- When reaching this part, check if rotation is not too tight. The goal is not to have a smooth rotation, rather, is that the friction between both pieces is low enough to allow them to move but strong enough to be left at an angle without falling down.
- While the peg and golden piece do not require glue, the screw will. Only glue it until you are satisfied with the rotation.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)