Ferrari F40

For single-color printed parts like the body and glass, you can hand-paint them according to your preference

The layer lines of the car body can be adjusted according to personal preference

============================================================

Note: For printing, please generally use the author's original layout. Adjust it yourself if other needs arise

============================================================

For coloring, it's recommended to lightly score with an engraving knife first to prevent the color from spreading along the layer lines

============================================================

As shown, secure the inner part through the tire onto the car body (may require tapping with a tool). Finally, insert the rim (just flush with the tire, do not push it in further)

============================================================

Recommended printing colors:

Headlights: Recommended to use transparent or silver filament

Taillights: Recommended to use red or transparent red filament

Exhaust pipe: Recommended to use silver or gray filament

Grille: Generally black or silver

Tires: Black

Rims: Choose different colors according to personal preference

============================================================

Model dimensions:

Length: Generally 10CM, with a front-back float of 1CM based on actual vehicle proportions

Width: Generally 6CM, with a left-right float of 0.5CM based on actual vehicle proportions

Height: Varies from 3-6CM depending on the car model

============================================================

Due to printer tolerance issues, if assembly is not smooth, you can trim or sand as needed

============================================================

I look forward to your support; your support is my motivation to continue