City of Tears Pond Water Fountain Functional
Print Profile(2)
Description
This is my pond sized version of the city of tears fountain. It is scaled for my H2D printer and prints in 2 parts to reduce the support issues. The fountain has a female ½ adapter on the bottom of the top half that a standard irrigation pipe (in the US can connect with). Because of the relatively peaceful nature of this fountain, I also added a ball valve to my incoming pipe to adjust the water flow rate to something appropriate for the model.
One word of caution with this design is that the supports are a pain to remove underneath the leafs on the bottom half. It isn't particularly fragile, but you will need some needle nose pliers and patience to do it.
If someone has a need for this fountain sized for the P1S or P2S, I am happy to make that adjustment for you (scaling it on your own will create nightmares with the threaded adapter).
I really hope you like it!
Boost Me (for free)
I always appreciate boosts and pictures of what you create. Thanks for the support!
You can check out my other designs at my homepage here: https://spencermann.com
It is a work in progress, but I hope to provide more information about my models, and some tips if you want to create your own.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)