X2D Left Auxiliary Fan Diffuser | Stop Warping !
Print Profile(3)
Description
If you experience warping because of the left auxilary fan on the X2D, then this might help you out!
The model redirects the air up so that the cooling function for materials like PLA and PETG still work and the chamber does not get too hot, though instead of directly blowing the air onto the model it redirects it up preventing warping :)
Install is really easy and reversible! The air is not redirected in a 90° angle but more a 70°~80° angle up.
With an angle of less then that the air will still hit the bed (I used those strings to confirm that and holding my hand there 😅)
This model is intended for the X2Ds left auxilary fan since that one is bigger then the right one (which has a few models out there it is compatible the same as the one found on the P2S)
Since the X2D can use a chamber heater I highly recommend printing this model out using ABS or PETG!!
Warning:
Apply this “mod” at your own risk, after installation please slowly move the tool head near it to see if it collides or not! there should be a small gap. Also becareful when inserting.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (59)