atomic cat fidget marble toy keychain

Thanks for reaching out!

Here we have a rule not to use a single Ai image. This means every image you see in posts or descriptions are real photos.

Another rule is not to upload designs that are not tested by us  first. So what you see is what you will print indeed.

Hope you like our work and maybe support us. Remember that you can support us for free just by like, follow, share and boost our work.

Atomic-style cat fidget toys with spinning marble eyes. Designed for smooth, satisfying motion, they double as playful desk toys or unique keychains. Minimal, retro-inspired, and fun to fidget with anytime

about the model:

• the design of the head was inspired by our cat drawer box here:

  https://makerworld.com/en/models/1643897

  

• this follows the marble fidget toys like those below. Please feel free to ask for your version.

  

• 2 versions available. one for 14mm marbeles like those from bambu ZB001 and one for 16mm marbles

• I have added a plate for the eyes if you dont own some of them.

  

• easy assembly. just snap and play. you will not need even glue for this. but if you think is needed please add some drops.
• the fit is snug while you assembly both the eyes or the head.

• there is a hole to attach a keychain holder if you wish to carry this with your keys.

  

• no ams is required for this. you can print it with a single color printer.

about the profile:

• 0.16 high quality profile for the head
• 0.12 layer for the eyes
• the profile uses ams but really there is no need for one. you can simple use pause comants to swap colors for the head or the eyes with the iris.
• the cats face is printed upside down so both the bottom and the top of the assembly features the beds texture.

assembly of the eyes:

use the center pin to push the 2 halfs of the ball together pushing the ne against the other:

assembly of the head:

• place the 2 eyes inside the slots of the head bottom and then place the face of the cat on top of them.

  

• push down the face so to completely sit on the bottom.

  

• please pay attention of the face cause its printed upside down. the bed texture of the first layer must facing up.

  

• attach a keychain holder if you wish.
• you are ready to play.

watch assembly guides below:

https://www.youtube.com/shorts/-lew5cnBdfU

added in our games and toys collection here:

https://makerworld.com/en/collections/6248242-toys-and-games

and in our keychain collection here:

https://makerworld.com/en/collections/5546765-keychains

🙏 Please don't leave negative feedback if you don't doublecheck that you used your own well working filament profiles and be very sure that you build plate is well cleaned! 

The designs we upload are well tested so you don't have to worry about them. we never upload a design without fully tested them first!

🙏 Feel free to Follow, Boost, Like & Share this work — your support means the world and helps us bring more designs.

ways you can support our work:

• https://buymeacoffee.com/orama3dvibes

• Dont forget that you can support us for free just by following and sharing our facebook, instagram, patreon, youtube and makerworld accounts.