Lola Bunny waifu 1

Browsing the internet I found this image of our adorable Lola Bunny. A slightly more voluptuous version than the one we know and certainly much more than the latest version of this female character.
If you are already a certain age and she was one of your female icons, you have some more on my profile.

Project: Lola Bunny 1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 136.8x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.64mm and the Actual Thickness is 2.63997mm

If you want it in a different size, you can modify the measurements in X and Y, but do not change Z

This print uses 5 unique filaments:

Black
Blue Gray
Dark Brown
Beige
White
 

To get the 5th color, my advice is that in Bambu Studio, you combine white with black, and then approximately when it has been printing for 1 hour and the black has finished, you replace the black spool with a white one (you have multiple videos on YT, but if you have doubts, ask).

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Dark Brown
    At layer #17 (1.44mm) swap to Beige
    At layer #25 (2.08mm) swap to White for the rest