X2D First Layer Adhesion Test ⧸ Bed Cleaning
Print Profile(2)
Description
Maximize your X2D first layer success with the largest coverage adhesion tester on MakerWorld, lifting cleanly with its comfort pull tab for quick, frustration-free checks. Models for left AND right nozzle!
 Designed as part of my ongoing collection of practical Bambu Lab upgrades. Each model is conceived, printed, and endurance-tested on my own machines, refined through dozens of iterations to match the printer’s true mechanical behavior. Precision isn't assumed here, it’s verified layer by layer.
Follow me if you like my work, that kind of appreciation really dries my filament. Likes and boosts feed the Maker World algorithm and keep the new models coming |
This model brings the proven A1 adhesion test concept to the new X2D. It is designed to cover a wide print area so you can quickly verify Z-offset, nozzle flow and surface adhesion. Booth for the left (direct drive) nozzle and the right (bowden drive) nozzle.
The continuous line pattern makes it easy to detect if the first layer is too high or too low. Once the print is complete, the plate lifts off cleanly using the integrated comfort pull tab, leaving the bed ready for your next job.
Use this test after nozzle swaps, filament changes, or bed cleaning to confirm consistent adhesion and a clean surface.
Helpful Advice:
- 2 layers highlight surface inconsistencies without excessive adhesion
- 1 layer shows trouble spots faster but sticks tighter - remove carefully!
- Clean the plate thoroughly using warm water and dish detergent (not hand soap)
- Run a calibration under Device → Calibration before testing for best results
Part #18 in my X2Design Journey.
Boost Me (for free)
Support for this model helps fund 3D printing in a local school in Lower Saxony, Germany. Contributions go toward printers and filament for student maker and robotics clubs, including preparation for "Jugend forscht" competitions. Likes, follows, and boosts help increase visibility and indirectly support hands-on technical education.
Translation Notice: I am not a native English speaker. I write all descriptions in English to ensure the best automated translation into other languages. To make the text smoother and more readable, I use language tools to refine my wording.
Bill of Materials Notice: Hero Shot models are usually printed in Bambu Lab PLA Basic, primarily Pumpkin Orange, Purple and Matte Charcoal Black. The Bill of Materials contains the recommended filament for the model, which may differ from the filament used for the photos.
Purchases made via the BOM support my work through the Maker World Commission Incentive at no extra cost to you.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (18)