HONDA wheel center cap (60mm)
Print Profile(1)
Description
3D model of center caps for Honda vehicles.
The caps have a diameter of 60 mm and feature a design based on the brand’s iconic logo. The model is optimized for 3D printing and has been tested in ABS, but it can also be printed with PETG, ASA, or similar materials depending on your needs (for example, better UV or heat resistance).
The caps use a simple snap-fit mechanism to ensure a secure fit in the wheel. For best results, I recommend printing with a finer layer height and optionally using dual-color printing to highlight the logo.
⚙️ Print settings:
- Material: ABS / PETG / ASA
- Layer height: 0.12–0.2 mm
- Infill: 30%
- Supports: not required
The model is suitable both for functional use and as a stylish detail to enhance the look of your car.
If you use or modify the model, I’d appreciate your feedback or if you share your results 🙂
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)