Dylan Dog Dawn of the Living Dead Hueforge - Free 3D Print Model

Search models, users, collections, and posts

Berzerg

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P2S

H2D Pro

H2D

X1 Carbon

H2S

P1S

P1P

X1E

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

8.3 h

1 plate

Open in Bambu Studio

Boost

Released

Description

You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 2.64mm and the Actual Thickness is 2.64mm

    #000000 PLA BambuLab Basic Black Transmission Distance: 0.6
    #545454 PLA BambuLab Basic Dark Gray Transmission Distance: 0.6
    #304301 PLA BambuLab Matte Pine Green Transmission Distance: 1
    #482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1
    #ae96d4 PLA BambuLab Matte Lilac Purple Transmission Distance: 2
    #f99963 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
    #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8
    #8bd5ee PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
    #c00d1e PLA BambuLab Basic Red Transmission Distance: 4
    #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 10 unique filaments

Swap Instructions:
    Start with Black
    At layer #5 (0.48mm) swap to Dark Gray
    At layer #7 (0.64mm) swap to Pine Green
    At layer #8 (0.72mm) swap to Indigo Purple
    At layer #10 (0.88mm) swap to Lilac Purple
    At layer #14 (1.2mm) swap to Mandarin Orange
    At layer #18 (1.52mm) swap to Beige
    At layer #22 (1.84mm) swap to Ice Blue
    At layer #27 (2.24mm) swap to Red
    At layer #30 (2.48mm) swap to Yellow for the rest.