Search models, users, collections, and posts
1:29 G Gauge 58' Depressed Center Flatcar
IP Report
Print Profile(1)
0.4 Nozzle for large parts. 0.2 Nozzle for small parts
Designer
26.7 h
11 plates
Open in Bambu Studio
Boost
59
107
1
5
82
18
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
PLEASE SEE ATTACHED ASSEMBLY GUIDE PDF
1:29 Scale 58' Depressed Center Flatcar. This car uses my 6-wheel Buckeye Trucks available on my page.
Minimum Radius/Diameter: 4' / 8'
Hardware List:
- (2) ¼" Steel Rod - 245mm long
- (14) ¼" Steel Rod - 74mm long (only 4 needed. Use all 7 for adding weight to car)
- (2) ¼" Steel Rod - 24mm long
- (4) M4 Threaded nut heat-insert. 6mm OD. 8mm deep is preferred but can be 6 or 10mm deep.
- (4) M4x14mm button head screws (allen key head)
- (1) Kadee #907 coupler set
- (1) 3/64" brass rod 4-pack (K&S metals)
- Adhesive. I prefer to print with PETG and use JB Weld Plastic Bonder epoxy to join the large pieces. For small pieces I prefer super glue gel.
- Optional: If using ‘Old Style Brake Wheel’, you'll need (2) 6D 2" Finish Nails. Cut them down to 38mm long, eliminating the pointy end.
Documentation (1)
Assembly Guide (1)
Assembly guide for Depressed Center Flatcar.pdf
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (1)