TADC Caine Silhouette Wall Art

I've already uploaded a silhouette wall art model of Bubble, to a bit of success. Since you all liked it so much, I went to work creating another model for you. So please welcome, Caine to the Silhouette Wall Art Family! Follow for more of The Amazing Digital Circus friends to be added! A Jax model is already in the works and is scheduled to be ready by the end of the week! As always, if you want to support the work I do, please visit our website at www.EnderLabs.org or you can leave a digital tip at www.buymeacoffee.com/1Ender

Thanks for your support and check back soon!

This model is printed with a 0.2mm Nozzle, but you can use a 0.4 Nozzle just fine. Caine is split into two plates, and does require assembly on the wall. You can either mount with brad nails, or you can use double sided tape, cut super thin. Assembly Difficulty on a scale of 1-10 is going to be at a 6. You need to maintain general boundaries and cut the tape very, very thin. Again, or you can use brad nails or push pins to mount. 

 I'm working on a backplate for him to sit on, so that assembly won't be necessary. Follow me for an update, soon. I will add it as a print profile, to this model, once complete.

The entire print takes less than 10g of filament! You can use black, or I think red would even look nice. If you decide to scale, ensure you select all parts, to ensure it scales equally.

As always, enjoy! If you have any issues, please don't hesitate to reach out to me directly, by going through my website, or you can message me here.