Axis Gear Works

cover

Thorinion.png

ComicThorinion.png

image1 (28).jpeg

DeadPoolMinionBodyShot (2).png

plate_1.png

573a75f2b8051a77.png

<figure class="table"><table><thead><tr><th>Setting</th><th>Value</th></tr></thead><tbody><tr><td>Nozzle</td><td>0.4mm</td></tr><tr><td>Layer Height</td><td>0.2mm</td></tr><tr><td>Infill</td><td>15%</td></tr><tr><td>Walls</td><td>2-3</td></tr><tr><td>Supports</td><td>Tree Slim,</td></tr><tr><td>Material</td><td>Bambu Labs Matte PLA</td></tr></tbody></table></figure><blockquote><p>💡 <strong>Material tip:</strong> My showcase print used PETG for extra durability and a slightly richer surface finish on the armor texture. PLA interface layers on the supports make cleanup much easier — highly recommended if you go the PETG route.</p></blockquote><h3>🎨 Color Notes</h3><p>The model is provided as a 3MF file with color regions pre-assigned — select your preferred filament colors in your slicer. Want a simpler approach? Print the whole figure in yellow and hand-paint the armor, cape, and hammer with acrylic craft paint. The surface texture holds paint well with no priming needed.</p><p>&nbsp;</p><h3>💡 Tips &amp; Tricks</h3><ul><li>Matte filament is strongly recommended over glossy — the armor detail and surface texture read significantly better in matte finishes</li><li>For a complete Mashup Mayhem display, print all figures at the same scale so heights are consistent across the collection</li><li>Scale up to 150% for a standout shelf centerpiece — larger prints show off the armor engraving beautifully and can print with .6 nozzle at .3 layer height.</li><li>If painting, block in the yellow body first, then layer the armor colors — dark base coat followed by a light dry-brush brings out the raised detail on the chest plate</li><li>PETG users: set support interface top Z distance to 0mm for clean interface layer removal</li></ul>

PLA with PLA supports 0.2mm layer, 2 walls, 10% infill

<figure class="table"><table><thead><tr><th>Setting</th><th>Value</th></tr></thead><tbody><tr><td>Nozzle</td><td>0.4mm</td></tr><tr><td>Layer Height</td><td>0.2mm</td></tr><tr><td>Infill</td><td>15%</td></tr><tr><td>Walls</td><td>2-3</td></tr><tr><td>Supports</td><td>Tree Slim — <strong>PLA interface layers recommended</strong></td></tr><tr><td>Support Interface Z</td><td>0mm top distance</td></tr><tr><td>Material</td><td>PETG (body) + PLA (support interface)</td></tr></tbody></table></figure><blockquote><p>💡 <strong>Material tip:</strong> My showcase print used PETG for extra durability and a slightly richer surface finish on the armor texture. PLA interface layers on the supports make cleanup much easier — highly recommended if you go the PETG route.</p></blockquote><h3>🎨 Color Notes</h3><p>The model is provided as a 3MF file with color regions pre-assigned — select your preferred filament colors in your slicer. Want a simpler approach? Print the whole figure in yellow and hand-paint the armor, cape, and hammer with acrylic craft paint. The surface texture holds paint well with no priming needed.</p><h3>💡 Tips &amp; Tricks</h3><ul><li>Matte filament is strongly recommended over glossy — the armor detail and surface texture read significantly better in matte finishes</li><li>For a complete Mashup Mayhem display, print all figures at the same scale so heights are consistent across the collection</li><li>Scale up to 150% for a standout shelf centerpiece — larger prints show off the armor engraving beautifully</li><li>If painting, block in the yellow body first, then layer the armor colors — dark base coat followed by a light dry-brush brings out the raised detail on the chest plate</li><li>PETG users: set support interface top Z distance to 0mm for clean interface layer removal</li></ul>

PETG w/PLA support Interface0.2mm layer, 2 walls, 10% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<p>Worthy of Mjolnir and undeniably adorable — the Thor-Ion brings the God of Thunder crashing into the Mashup Mayhem collection in full Asgardian glory. Winged helmet, flowing cape, armored chest plate, and that iconic hammer raised high, all packed into a 95mm Minion frame. Whether you&#39;re building out the full Mashup Mayhem crew or just need the mightiest desk guardian in the Nine Realms, this one&#39;s for you.</p><blockquote><p>⚠️ <strong>Detail note:</strong> Helmet wing tips, cape edge, and Mjolnir handle print best at 0.2mm layer height. Scaling below 75% may soften fine surface details on the armor and belt.</p></blockquote><h3>✅ Features</h3><ul><li>Full Thor costume detail: winged helmet, Mjolnir, red cape, armored chest plate with silver accents, and brown boots</li><li>Single-body print — no assembly required, prints standing</li><li>Print in your hero colors and hand-paint the details, or run AMS for a full multi-color result</li><li>Stable flat-footed base — no brim required at default scale</li><li>Part of the growing AGW Mashup Mayhem series (10+ superhero Minion figures and counting)</li></ul><p><strong>AGW Mashup Mayhem Collection</strong> — see also: BatMinion | Flash Minion | SuperMinion | Robin Minion | Deadpool Minion | Hulk Minion | Captain America Minion | Iron Minion | Doctor DooMinion | The Thing Minion | Minion Torch | Mr Fantastic Minion | SpiderMinion | and more on the way!</p>

Print Profile(2)

Description

✅ Features

Comment & Rating (0)

License